Fmi CTS Series User Manual download pdf

OVERVIEW:

The CTS from Fluid Metering Inc. is the solution for

accurate, maintenance-free injection of liquid sodium

hydroxide (Caustic Soda) typically used for pH

adjustment, as well as other chemicals used in water

and wastewater treatment applications.

The CTS system eliminates check valves and/or

peristaltic tubing typically present in traditional

chemical metering systems, which are the primary

sources of routine maintenance and downtime. The

CTS does not lose prime, even against pressure, or air

lock. The CTS is available as a complete system

(CT1V & CT2V) consisting of the CTS Pump Module

and C100A Variable Speed Controller, or can be

supplied alone to be used with a compatible controller.

The CTS Pump Module is a unique valveless pump

design consisting of a rotating and reciprocating

(CeramPump®) ceramic piston, direct coupled to a

variable speed drive motor. The CTS pump injects the

caustic soda directly into the main water stream, at

back pressures up to 125 psi.

The C100A Variable Speed Controller from Fluid

Metering, Inc. provides an ideal control interface for

the CTS. The C100A supplies a variable 0-90VDC

power source which can be controlled either manually

using a from panel mounted rotary dial, or

electronically via a 4-20 mA control input.

CTS Pump Module

and C100A Variable S

eed Controller

CTS Series: CT1, CT2, CT1V, & CT2V

Chemical Treatment Systems

Page 1of 9

INSTALLATION & OPERATING INSTRUCTIONS

IN-CTS-13

1/4/13 HW

* Other commercially available controllers may work, however we

recommend contacting FMI for details.

1 2 3 4 5 6 7 8 9

Summary of Contents

Page 1 - Chemical Treatment Systems

OVERVIEW: The CTS from Fluid Metering Inc. is the solution for accurate, maintenance-free injection of liquid sodium hydroxide (Caustic Soda) ty

Page 2 - 1/4/13 HW

CTS Chemical Treatment System Supply Voltage: 0-90 VDC** CTS Supply: 1/4” FNPT CTS Outlet: 1/4” FNPT IMPORTANT NOTE: Supply and Outlet fittings cont

Page 3

ADJUSTING FLOW RATE Mechanical Adjustment: By adjusting the angle of the high pressure pump head (pump head on right side of drive) using the adjust

Page 4 - Maintenance

Page 4 of 9 Calibration Reference ChartsMaintenance Periodic:  Rinse the piston where it enters the

Page 5 - Mounting Diagram

C100A Variable Speed DC Controller GENERAL The FMI C100A Variable Speed DC Controller is designed to operate with FMI Vari

Page 6 - WIRING PROCEDURE

Page 6 of 9 WIRING PROCEDURE 1) Remove the four (4) cover screws to remove the cover and g

Page 7 - IN-CTS-13

Page 7of 9 IN-CTS-13 1/4/13 HW

Page 8

Page 8 of 9 IN-CTS-13 1/4/13 HW

Page 9 - Tips from the Field

IN-CTS-10 Tips from the Field The CTS has been dynamically tested, including the integrity of all internal fluid connections, prior to shipment. The

Comments to this Manuals

No comments

Fmi CTS Series User Manual

Browse online or download User Manual for Pumps Fmi CTS Series. FMI CTS Series User Manual

Summary of Contents

Comments to this Manuals